啟動過程中有Y/N選擇輸入Y 沒有Y/N選擇直接回車 切記 不能錯一步！！?。。。?/div>
啟動后如所示：
RPM Time:
1480991993
VOS Time:
1587721737
JDK Time:
1587721681
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000000
link/ether fa:16:3e:da:bb:e9 brd ff:ff:ff:ff:ff:ff
inet 192.168.64.4/20 brd 192.168.79.255 scope global eth0
inet6 fe80::f816:3eff:feda:bbe9/64 scope link
valid_lft forever preferred_lft forever
ACCESS_UUID=921efe8a-1df9-438b-9112-904b4f646665 這個是系統標識
done
(ifconfig查MAC 例：FA-16-3E-DA-BB-E9)
(查看系統標識列 cat /home/kunshi/vos3000/server/etc/server.conf)
5.修改注冊機注冊.bat
6.雙擊生成dat文件上傳到/home/kunshi/license下
7.執行reboot重啟
8.客戶端登錄：admin + admin +標識碼（賬號和密碼默認是:admin）
